Check out the new stuff!
Hover over the "Products" tab up top and you'll find quite a few new goodies, with more coming. We now have bolt-on universal remote filter kits as well as "fabricator only" kits. Both use our patent pending ultra-slick filter mount, in a nice brushed finish or mirror polished, and are available with many different fitting configurations.
We're also redesigning our RF1 kit for Touring/FXR so that it too uses our proprietary mount and hope to have that on the site within a day or two. And the biggest news is...
Oil Coolers are on the way! Thank you all for your patience. We've finally completed all the testing we wanted to do and have materials ordered. We hope to have them available by February 1, 2012.
We're also redesigning our RF1 kit for Touring/FXR so that it too uses our proprietary mount and hope to have that on the site within a day or two. And the biggest news is...
Oil Coolers are on the way! Thank you all for your patience. We've finally completed all the testing we wanted to do and have materials ordered. We hope to have them available by February 1, 2012.
 |
 |
Photos courtesy of Mike Wallace. Mike runs our RF2 series kit on both of his bikes.
Please see the "more..." tab at the top of the page for much more content including FAQ's and how to contact us via email. Thanks.
Finally, an absolute end to the mess when changing the oil in your Harley-Davidson® touring bike, and very soon, a line of oil coolers that will cool the wildest of engines. If you can build it, we can cool it.
Our kits move the stock oil filter to a much more accessible location, eliminating the hassles with crank position sensors, oil cooler adapters, specialty filter wrenches that still don't work, and the mess in general.
We do our absolute best to offer you the highest quality parts possible and everything possible is Made In America. All of our mounting brackets are precision cut on an OMAX 5555 Waterjet Machining Center by Direct Waterjet, Inc (www.directwaterjet.com).
Our proprietary filter mounts are CNC machined from solid, aircraft quality, 6016-T6 Billet Aluminum. The clamps that route the lines up along the inside of the left frame rail are constructed of that same billet material, although they're done manually.
Each and every one of our kits is tested at 100psi so you can rest assured it is not going to leak when you install it.
We'd like to send a special thanks to all of our family and good friends that offered support and encouragement along the way. Most notably Mom & Dad Roberts, Frank & Mary Schmidt, and Donald Shane. We could not possibly have done this without you.
Please Note: We are not part of, or affiliated with, The Harley-Davidson® Motor Company in any way. We simply ride 'em, wrench 'em, and offer a few sensible parts to help make riding and wrenching more enjoyable.
